Festo MAS Série Notice D'utilisation page 18

MAS−...
Remove the packaging. The packaging material can be recycled (except for
S
oiled paper which must be disposed of ).
Slowly pressurize the complete system.
S
To do this use the safety start−up valve
type HEL−... . In this way you will prevent
sudden uncontrolled movements.
Always use the product in its original
S
state without undertaking any
modifications.
5 Fitting
Mechanical components
Please note
Mechanical stressing of the contractible
membrane can damage the MAS−... .
S Ensure that the MAS−... is
fitted free of torsional forces.
not fitted bent (crushed) even when
pressureless (no wrinkles).
Please note
If the thread of the adapter of type
MXAC−... is too long, the connecting thread
of the MAS−10−... will be damaged (no
force limitation).
S Make sure that the thread lengths of the
adapter and the MAS−...(see Fig. 8) are
suited to each other.
Lubricate the thread of the connecting adapter.
S
The assembly forces will then be reduced.
In order to fit the adapter as described in the section Accessories," screw it
S
into the fastening thread 1.
18
Fig. 5
Ó Ó
Ó Ó
Ó Ó
Ó Ó
Fig. 6
Ó Ó Ó Ó
Fig. 7
Ó Ó
Festo MAS−... 0401b − English
Ó Ó
Ó Ó
Ó Ó
1