Becker Traffic Pro Instructions De Montage page 22

Installation guide
Testing the voice ( SPEECH TEST
A test program is used to test the voice.
• In the Service Mode, select
knob and press to confirm.
The announcement "Please insert Navigation CD" is given.
By pressing the right rotary knob
peated.
After completing the test, press the
back to the Service Mode.
Demo Mode (
DEMO MODE
The demo mode is intended for demonstration purposes. Aprepro-
grammed location will serve as the starting point for navigation.
• In the Service Mode, select
knob and press to confirm.
Select between
ON
knob . By holding down the right rotary knob
is confirmed.
• You can now enter a destination as described in the operation
guide.
• To switch off the demo mode cancel the simulated route guidance
and repeat steps to go into the service menu. Select
pressing the right rotary knob
knob the selection is confirmed.
ATTENTION: To turn ignition off and on does not switch off the
demo mode
Subject to correction and technical modifications
)
using the right rotary
SPEECH TEST
, the announcement can be re-
Nav button. The unit switches
)
using the right rotary
DEMO MODE
and by briefly pressing the right rotary
O..
. By holding down the right rotary
SENSORS
S P E E C H T E S T
DEMO
SPEECH TEST
D E M O
VERSION
DEMO MODE
, the selection
by briefly
O..
22
ON
/ O..
Copyright by Becker GmbH, D-76303 Karlsbad