Service Mode - Becker Traffic Pro Instructions De Montage

Installation guide

11. Service Mode

In Service Mode, various functions can be checked in detail and the cal-
ibration can be modified.
• Switch on the unit (see operation guide).
Enter code (see operation guide).
• If the unit has already been calibrated, select the main navigation
menu by pressing the
If the unit has not been calibrated, proceed as described in the after
next point.
Nav
• Press the button again to access the system settings.
• Press and hold the
multifunction button. This calls up the Service Mode.
5
The following functions can be selected in the Service Mode:
• - GPS function test
GPS IN.O
• - function for deleting the calibration or for setting
CALIB RATION
a calibration
•
CALIB RATION RIDE
•
MODULE TEST
• - sensor function test
SENSORS
•
SPEECH TEST
• - demo mode selection
DEMO
• - the status of the Navigation CD is displayed
VERSION
By turning the right rotary knob
(large letters) and press to confirm.
Subject to correction and technical modifications
Nav
button.
multifunction button. Then press the
3
- display for calibration ride
- internal component test
- voice test
, select the desired entry
DEST. MEMORY
D E S T I N A T I O N
P.O.I.
TIME
S A V E P O S I T I O N
*LANGUAGE
VERSION
G P S I N . O
CALIBRATION
16
Copyright by Becker GmbH, D-76303 Karlsbad