Speed Levels; Maintenance, Cleaning & Storage; Troubleshooting; Defects & Malfunctions - Tunturi Pistolet de massage mini 10567845 Mode D'emploi

English

Speed levels

Use the control button to toggle between the
different speed levels.
- Press control button shortly to change speed
level.
- The Speed level indicator LED's shows the
operation speed of the massage gun.
Toggle sequence is :
Speed 1 1 LED lights up
Speed 2 2 LED lights up
Speed 3 3 LED lights up
Speed 4 4 LED lights up
Speed 5 5 LED lights up
Speed 6 6 LED lights up
Standby 0 LEDs lights up
‼ NOTE
• By pressing and holding the control button
in operation mode, you will switch the
massage gun in Off mode.
Maintenance, cleaning &
storage
- Use a slightly damp towel to clean device and a
dry with a soft cloth.
- Avoid moist to enter the device's housing at all
times.
- For storage or travel store in supplied storage
box.
‼ NOTE
• When not using the massage gun for a
longer period of time, we recommend
you to charge the device at least once a
month. This is to keep the battery in optimal
condition.
• An exhausted battery will shorten it's lifetime
or cause performance failure.
8

Troubleshooting

The massage gun does not have an error code
signalling system. When there is too much stress
applied to the massage gun when being in use,
the massage gun will shut off.
Try to resolve by:
- When the massage gun is hot, give it some
time to cool off.
- Press the control button and hold for 3 seconds
to turn in Stand By mode again, and operate it
1400 rpm
as normal.
1680 rpm
When a abnormal sounds comes out of the
1960 rpm
massage gun during usage, stop using the
2240 rpm
massage gun to avoid damage.
Try to solve by:
2520 rpm
- Reinstalling the massage head to make sure the
2800 rpm
fixture is correct.
0 rpm
- Applying less load on the massage gun when
using.
- When the massage gun will not turn on, try to
charge it for at least 4 hours to make sure the
battery is charged.
Defects & malfunctions
Despite continuous quality control, defects and
malfunctions caused by individual parts can
occur in the equipment. In most cases, it will be
sufficient to replace the defective part.
- If the equipment does not function properly,
immediately contact the dealer.
- Provide the model number and the serial
number of the equipment to the dealer. State
the nature of the problem, conditions of use
and purchase date.