Installing Corner Cabinet - NewAge Products Bold 3.0 Serie Guide D'installation

Installing Corner Cabinet

Parts Needed.
Lock Nut
Wall Washer
(1/4")
# 8 x 5/8"
Screw
2 Attach top to one cabinet using 1/4" x
5/8 hex bolts, nuts, and washers.
4
Slide in corner and attach
remaining cabinets.
10
(1/4")
1/4" x 5/8
Hex Bolt
Note: Ensure there is enough assembly
room. Cabinets must be assembled away
from corner to access backs of cabinets.
On adjacent edges attach 2 support
1
brackets to underside of corner top
using the supplied (4) #8 x 5/8" screws.
3
2
1
1 2 3
Important: For mounting top flush with back of
cabinet follow step A, for mounting top flush with
front follow step B and flush with edge step C.
3
Attach second cabinet to top.
B