Power Linking - Chauvet Professional Ovation F-415VW Manuel De Référence

AC/DC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz or
28 VDC power from a conditioned professional regulated battery (for example, Anton Bauer or Block Battery). Never
connect both power sources at the same time.

Power Linking

You can link up to 12 Ovation F-415VW products at 120 V, 21 products at 208 V, or 23 products at 230 V. Never exceed
this number. Power-linking cords can be purchased separately.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
• Never connect this product to AC and DC power sources at the same time.
Replacing the Fuse
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
Power Diagram
100–240 VAC, 50/60 Hz
Input Only
DMX Linking
The Ovation F-415VW will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is available
from www.chauvetprofessional.com.
DMX Connection
The Ovation F-415VW uses a 5-pin DMX data connection for its 8 DMX personalities: 1 Ch, 4 Ch, 6 Ch, 7 Ch, 9 Ch,
13 Ch, 16 Ch, and 18 Ch. See the User Manual for information about connecting and configuring the product for DMX
operation.
Master/Slave Connection
The Ovation F-415VW uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation F-415VW supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Ovation F-415VW QRG Rev. 7
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
Rear Panel View
www.chauvetprofessional.com
Wire (Europe)
Brown
Blue
Green/Yellow
28 VDC Input Only
for more details.
EN
Screw Color
Yellow/Brass
Silver
Green
2