Enrico Mline Mode D'emploi page 9

3. Rinse the grill plate (1) and the pizza pan (6) with warm water and mild detergent and then dry both
parts thoroughly.
4. You should perform the initial start-up without any food since odors or smoke may develop due to
coating residues that may still be present. Allow the device to heat up while empty for approx. 15
minutes (see the "Use" chapter).
Use
CAUTION!

Danger of burns! The device will become hot during use. Make absolutely sure that you do not come
into contact with any heated parts during and after use of the device. Use oven cloths or kitchen
gloves when handling the device.

Ensure that there is sufficient ventilation while the device is in operation.

Only use heat-resistant utensils to place and remove the food. Keep metal objects or other sharp
objects away from the device. These could damage the coating of the grill plate or the pizza pan.

Make sure that the pizza or the food which you place on the pizza pan do not touch the top heating
element of the device.
Please appreciate that no precise specifications can be given for cooking times and cooking temperatures as
cooking times and cooking temperatures depend very greatly on the size, quality and texture of the particular
food.
1. Prepare the food that you want to grill, fry or bake.
2. Place the device on a dry, heat-resistant, flat surface at a sufficient distance from other objects and
from the wall. Make sure that the device is out of the reach of children!
3. Place the grill plate on the mounts above the top heating element. It must engage in the mounts.
4. Slide the pizza pan into the compartment below the grill plate (between the top and bottom heating
element). Make sure you insert it the right way round. It must be possible to slide it fully under the
grill plate and it must not stick out at the front.
5. Fully unwind the mains cable.
6. Check whether the On/Off switch (4) is in the OFF position.
7. Plug the mains plug into a properly installed and earthed plug socket (220-240 V~) with safety
contacts. Make sure that the cable is not in contact with the grill plate or the metal parts of the
device!
Grilling
On the grill plate, you can grill meat, fish, vegetables or seafood using very little or no cooking oil.
This method can be used to prepare both marinated and not marinated foods. Using the grill plate is also a
great way to bake pancakes or crêpes. Cooking oil is a flavor carrier and supports the non-stick effect of the
ceramic surface. If necessary, rub a little cooking oil onto the grill plate before you heat it up. However, cooking
oil is not absolutely essential.
1. Turn the On/Off switch to the I position.
2. Turn the temperature controller (3) to an average temperature setting and allow the device to heat up
for a short time.
3. Place the food onto the grill plate. Adjust the temperature setting if necessary. (On the highest
temperature setting, the grill plate gets to approx. 180°C.)
4. Turn the food over, let it grill on the other side and then remove the food.
5. Turn the On/Off switch to the OFF position.
6. Allow the grill plate to cool down completely before you clean it (see the "Cleaning and Storage"
chapter).
Baking Pizza
1. Turn the On/Off switch to the II position.
2. Turn the temperature controller (3) to the highest setting (approx. 250°C) and allow the device to
heat up for a short time.