Pure Cycle Tm - Samsung WA456 Serie Mode D'emploi

maintaining your washer
PURE CYCLE
TM
Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Select the Pure Cycle
• Once the Pure Cycle
that can be set is Delay Start.
3. Press the Start/Pause button.
• If you press the Start/Pause button, Pure Cycle begins.
• Using Pure Cycle, you can clean the drum without using a
cleansing agent.
CAUTION
• Never use Pure Cycle when laundry is in the washing
machine. This may cause damage to the laundry or a
problem with the washing machine.
The Pure Cycle Auto Indicator Function
• If the "Pure Cycle" is lit after a wash, it indicates that tub
(drum) cleaning is required. In this case, remove the laundry
from the washing machine, turn the power on, and clean
the drum by running Pure Cycle.
• If you do not run Pure Cycle, the "Pure Cycle
turns off. However, the "Pure Cycle
again after two washes. Not running Pure Cycle at this
point will not cause a problem with the washing machine.
• Although the Pure Cycle Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
30_ maintaining your washer
course.
TM
course is selected, the only function
TM
" indicator will light
TM
WA422* / WA400*
" indicator
TM
WA422* / WA400*
WA456*
WA456*