Smart Control - Samsung NX6087S Serie Mode D'emploi

Welcome Lighting
Lighting pattern will be shown on cooktop knobs when the oven display wakes up.
1. Tap and hold for 3 sec.
2. Select Welcome Lighting using the dial knob.
3. Turn the dial knob to select On/Off and push to save the change.
Demo mode
This is used by retailers for display purposes only. In this mode, the heating
element does not operate.
1. Tap and hold for 3 sec, and select System settings using the dial knob.
2. Select Demo mode using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.
Reset
Reset your oven th its factory default settings. This will erase all data and can't be
recovered.
1. Tap and hold for 3 sec.
2. Select Reset using the dial knob.
3. Turn the dial knob to select Cancel/Reset.
NX60T8711SS_AA_DG68-01220A-00_EN.indd 35

Smart Control

How to connect the oven
1. Download and open the SmartThings app on your smart device.
2. Follow the app's on-screen instructions to connect your range.
3. Once the process is complete, the connected
displays and the app will confirm you are connected.
4. If the connection icon does not turn on, follow the instruction on the app to
reconnect.
icon located on your range
1
English 35
3/26/2020 9:00:58 PM