Transport, Storage And Handling - TECO 680 Manuel D'utilisation

TranSPorT, SToragE anD
The basic wheel balancer packaging consists of 1 wooden crate containing:
- the wheel balancer (Fig.10);
- the equipment
- the wheel guard and corresponding mounting tube (C - D, Fig. 5a).
before installation, the wheel balancer must be shipped in its original packaging, making
sure that the machine is maintained in the position indicated on the outer packaging.
The machine can be moved by placing the packaging on a wheeled trolley or inserting
the forks of a fork lift truck in the relative slots in the pallet (Fig. 1).
- Packaging dimensions:
Length
(mm)
1150
1400
The machine must be stored in an environment meeting the following requirements:
• relative humidity ranging from 20% to 95%;
• temperature ranging from -10° to +60°C.
WARNING
Do not stack more than two packs to avoid damaging them.
For installation or subsequent handling the machine can be moved using the following
methods:
- with a crane, using special equipment that holds the machine at the designated lifting
points (Fig. 2 - TECO 680);
Operator's manual TECo 680 - 680 PlUS - 680 PlUS Pl
HanDling
Depth Height
(mm) (mm)
990 1175
760 1160
1
Weight Packaging weight
(kg)
123
version PR
113
version NO PR
132 (version PLUS)
EN
(kg)
15
22
69