Table des Matières
Publicité
5
EN
Free motion darning
Presser foot available as optional accessory.
Set the machine as illustrated. Move the
drop feed control to right side to lower the
feed dogs. (1)
Remove the presser foot holder. (2) (see
page 26)
Pattern selector on "
".
Turn the stitch length dial to "0".
Turn the stitch width dial to "0".
Attach the darning foot to the presser foot
bar. The lever (A) should be behind the
needle clamp screw (B). Press the darning
IRRW ¿UPO\ IURP EHKLQG ZLWK \RXU LQGH[ ¿QJHU
and tighten the screw (C). (3)
First sew round the edge of the hole (to
secure the threads). (4) First row: Always
work from left to right. Turn work by 1/4 and
oversew.
A darning ring is recommended for easier
sewing and better results.
Move the drop feed control to left side for
normal use.
Publicité
Table des Matières
