NEC AccuSync Serie Mode D'emploi page 15

Specifications cont.
Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Display Colors
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
15500371.wpc
AccuSync
Monitor
Diagonal: 19.0 inch
18.0 inch
Radius: 1360 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Analog input: Unlimited number of Colors
Horizontal: 31 kHz to 96 kHz
Vertical: 55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 153 Hz
832 x 624 @ 55 to 144 Hz
1024 x 768 @ 55 to 120 Hz
1152 x 870 @ 55 to 105 Hz
1280 x 1024 @ 55 to 89 Hz ..................... NEC cites recommended resolution at
1600 x 1200 @ 55 to 76 Hz
Horizontal: 356 mm/14.0 inches
Vertical: 267 mm/10.5 inches
366 mm/14.4 inches
274 mm/10.8 inches
AC 100 – 240 V, 50/60 Hz
2.0A @ 100 – 240 V
442 mm (W) x 453 mm (H) x 455 mm (D)
17.4 inches (W) x 17.8 inches (H) x 17.9 inches (D)
20.0 kg
44.1 lbs
0°C to +35°C
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
-20°C to +60°C
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
15
™ 90
90° deflection, 0.26 mm trio dot pitch,
medium short persistence phosphor,
multi-layered, anti-static screen coating,
semi-tint screen, Invar Shadow Mask and
OptiClear
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
85 Hz for optimal display performance
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
13
9/30/99, 5:41 PM
Notes
® screen surface.