Signal Input Connection - Conrad 1193915 Notice D'emploi

8. Signal Input Connection

The active PA system is equipped with symmetrical XLR plug combination sockets and additionally with asymmetric
cinch connections. The connections selected do not affect function. Only use one connection type at a time, though.
When connecting the signal inputs, make sure that the connection cables are neither pinched nor
damaged by sharp edges.
The inputs must only be connected to low-level audio device outputs of audio devices.
The active PA system and the device it is connected to must both be switched off during connec-
tion.
For the connection of the RCA inputs, only use suitable shielded cinch or XLR or jack-plug lines.
Use of any wrong cables may cause interferences.
To avoid distortion or mismatching that may damage the active PA system, only audio devices with
a cinch output may be connected to the cinch inputs of the device. Only devices with XLR or jack
outputs must be connected to the XLR-jack combination inputs.
• Connect the cinch connections INPUT L/R (8) or the XLR jack plug combination connections
INPUT LEFT/RIGHT (8) to the pre-amplifier outputs of the upstream audio device (e.g. mixer).
• Connect the INPUT R or RIGHT connection to the right pre-amplifier output and the INPUT L or LEFT connection to
the left pre-amplifier output.
25