Samsung DVD-P390 Mode D'emploi page 14

Masquer les pouces Voir aussi pour DVD-P390:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

connections
Connecting to a TV (Video)
1
Using Video/Audio cables, connect the VIDEO (yellow)/
AUDIO (red and white) OUT jacks on the rear of the
DVD player to the VIDEO (yellow)/AUDIO (red and
white) IN jacks of your TV.
2
Turn on your DVD player and TV.
3
Press the input selector button on your TV remote control
until the Video signal from the DVD player appears on
the TV screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of
your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD player.
14_ connections
WHITE
RED
YELLOW
Video
Audio
Cable
Cable
WHITE
RED
YELLOW

Publicité

Table des Matières
loading

Table des Matières