Starting - Lincar Ilaria 703T-G Instructions D'usage Et Entretien

In to order grant a perfect combustion
•
it's necessary to preserve the wood in a
dry and clean place.
The wood thermic output is related to its
•
humidity in %. (see the schedule ).
2.3

Starting

Before the appliance starting, every operation concerning the assemble, connection to
•
exhaust fumes, flue should be done. During first ignition painted parts and mastic will
complete the drying process so it can cause bad smell. To air environment till bad smell
finish. The complete drying process will finish after any heating operations.
This appliance is a domestic cooker with an integrated boiler fired by solid fuel, whose
•
functioning conforms to the standard EN 12815.
Thanks to combustion chamber structure, the equipment has an high calorific efficiency
•
COMBUSTIBLE LOADING
The appliance should be loaded manually during the functioning.
•
The loading of combustible should be done when the flame is minimum in order to avoid
•
the out coming of the combustion products or fumes from the opened door..
Open the door of the fire box, put in the appropriate quantity of wood and close the door.
•
During this operation always use the tools furnished with the cooker.
It is absolutely not allowed to introduce the fuel from the rings placed on the top of the
•
plate.
STARTING AND FUNCTIONNING
N.B. For starting never use : alcohol, fuel, or others liquid combustibles.
In case of starting during particular cooling days or in a condition of low pressure, it's
•
advisable to heat the flue before the starting, burning inside it some pieces of papers.
After that effect a regular heating of the flue as well as of the appliance, introducing
small quantities of fuel, which allow an easy and rapid defluxion of the combustion
smokes.
For the combustible quantities please read the "Technical Data " .
•
IT IT IT IT- - - - GB
40/124
GB- - - - FR FR- - - - ES ES- - - - DE DE mod. 703T
GB GB FR FR ES ES DE DE