Fastener Interchange Information; Loading/Unloading The Nailer; Loading The Staples; Loading The L-Cleats - CH CHN50300 Instructions D'utilisation

Operating Instructions and Parts Manual
Set-Up (Continued)
Fastener Interchange
Information
Fasteners used in the Campbell
Hausfeld CHN50300 Flooring
Nailer / Stapler will also work
in the following brand units:
Bostich, Porter Cable, Porta-nails,
Primatech, Senco, Power Nail, Grip
Rite, High Pro, B&C Eagle, Grizzly,
and Craftsman.

loadINg/uNloadINg tHe NaIler

Always connect the tool to the air supply
before loading fasteners. Choose which
type of fastener you want to use for you
project. Additional fasteners can be found
at major home centers.

loading the Staples

1. Hold the tool firmly, press the lock and
pull the magazine door (see Figure 16).
2. Place the staples straddling the top of
the magazine (see Figure 17).
3. Push and lock the magazine door back
in place (see Figure 18).

loading the l-Cleats

1. Hold the tool firmly, press the lock and
pull the magazine (see Figure 16).
2. Place the specified type and size of L-
Cleats in the magazine from side. The
head of the L-Cleats should be inserted
into the notch on the fixed magazine
(see Figure 19).
3. Push and lock the magazine door back
in place (see Figure 18).
12
www.chpower.com
Figure 16 - Press the lock and pull the
magazine door
Figure 18 - Push the magazine closed
Press
Lock
Pull
Magazine
Staples
Straddle
Figure 1 - Place StaPleS straddling the
top of the magazine
L-Cleat
heads rest
in groove
Figure 1 - the head of the l-Cleat
should rest on the groove of the fixed
magazine