Serta Motion Essentials II Manuel Du Propriétaire page 7

steP 2
Carefully lift the adjustable base frame from the
shipping carton, keeping the unit top-side-down.
steP 3
Install (4) legs into the base frame. Simply screw each
leg into a tapped hole at each corner of the base frame
(FIGURE 1).
FIGURE 1
steP 4
Remove and extend out power cord from the
protective packaging.
WARNING
POWER CORDS MUST NOT INTERFERE WITH
ANY ADjUSTABLE BASE MECHANISMS.
steP 5
Remove the plastic packaging from the adjustable base
frame. Carefully rotate the base frame over to position
the base top-side-up.
installation
RECOMMENDED FOR HANDLING AND
LEGS – SCREW INTO
TAPPED HOLE AT
EACH CORNER
Serta Motion Essentials™ II Owners Manual 99301408
®
WARNING
AT LEAST TWO PEOPLE ARE
MOvING ADjUSTABLE BASE.
7