SCS Sentinel VisioBell CFI0026 Notice D'utilisation Et D'installation page 19

D2- Adding the doorbell to the application
Plug in the power to the doorbell. Your phone must be connected to the same Wi-Fi
network as your doorbell. Make sure Wi-Fi is available at the doorbell location.
Then follow the steps below in the application:
1.
Click on
and click on "NEW
DEVICE" to
add your doorbell.
4.
Wi-Fi
2.
Enter your wi-fi key
and scan the QR
code on your doorbell
or enter the code
manually.
5.
Enter a name for the
doorbell and the room
in which it is located.
3.
The network
needs to be
2.4 GHz to
work.
2.4 GHz
When the bell is flashing
red, press next. If the
bell is not flashing red,
press the reset button
6.
Add a profil
picture from
your camera, the
gallery or select
a picture by
default (product
visual or last
motion capture).
for 5s.
EN
19