Planning Installation - Aria QR810 Manuel De L'utilisateur

Pre-Installation (continued)

PLANNING INSTALLATION

Number of people required: 2 strongly recommended .
1 . Choose a location for your range hood . The range hood location
should be away from strong draft areas, such as windows, doors,
and strong heating vents .
2 . Measure all distances to ensure the proper position of the range
hood (A) and chimney set (B, C) .
- The size of the range hood installation location must have
a width (1) of at least 29.5 in. (750 mm) and a depth (2) of
at least 19.7 in. (500 mm) to accommodate the size of the
range hood (A) .
- The minimum distance (3) from the cooking surface to
the range hood is 26" (660 mm). If your range specifies a
different distance, use the greater distance of the two . For
best performance, distance (3) should not exceed 36 in
(914 mm).
3. A qualified technician must verify if the supplied mounting
hardware is appropriate for your wall type .
4 . Due to the size and weight of this range hood, the supports must
be firmly attached to the wall. For plaster or sheet rock walls, the
support must be attached to wood wall studs . If this is not possible,
a support structure must be built behind the plaster or sheet rock .
5 . Put a thick, protective covering over your counter, cooktop, or
range to protect it from damage and dirt during installation .
Remove any hazardous objects around the area .
All manuals and user guides at all-guides.com
7
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
WARNING:
Always wear safety goggles and gloves during
installation .
NOTE:
Do not remove the plastic covering on the chimney set at this time,
as it protects the chimney set from scratches during installation.
C
B
A
1
3
Fig. 2
2
CONGLOMKB .COM