Domo DO939K Mode D'emploi page 35

PARTS
1. Freezer compartment
2. Temperature control knob
3. Glass shelf
4. Vegetable drawer
5. Levelling feet
6. Door shelves
INSTALLATION
· Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth
and the inside with a wet, lukewarm cloth.
· Select a place with a strong, level floor.
· Allow 10 cm of space between the back of the refrigerator and any adjacent wall.
· Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources
nearby will cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly
on the evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated
on the rating label of your appliance corresponds to the voltage in your home. A different
voltage could damage the appliance.
· After installation, leave the freezer for 24 hours before turning it on. This way the
refrigerant can settle.
· Allow the appliance to run empty for 8 hours so the compartment can cool to the
appropriate temperature.
· For uneven surfaces, front feet can be aligned.
www.domo-elektro.be
1
2
3
4
5
6
35
DO939K