Safety; Danger Caused By Electric Current; Safety Instructions For The Electrical Connections; General Safety Instructions - Graef CM102 Instructions D'utilisation

Safety

Danger caused by electric current

Mortal danger is caused by contact with energised cables or components!
Please observe the following safety instructions in order to prevent an exposure
to electric current:
- Do not use the unit if the mains cable or plug are damaged.
- In this case, you should let the Graef Customer Service install a new connec-
tion cable before using the appliance again. This may be done also by an
authorised specialist.
- Do not open the housing under any circumstances. If live connections are
touched or the electrical and mechanical construction are modified, there is
the danger of electric shock.
- Never touch live parts. This can cause an electric shock and may cause even
death.

Safety instructions for the electrical connections

For safe and fault-free operation of the unit, the following requirements have to
be met during the electrical connection:
- Before connecting the unit, compare the connecting data (voltage and fre-
quency) on the type plate with those of your energy network.
- These details must correspond so that no damage occurs to the unit. In case
of uncertainty, please contact a qualified electrician.
- The socket has to be protected at least by a 10 amps circuit breaker.
- Make sure that the power cable is not damaged and is not laid across hot
surfaces or sharp edges.
- The connecting cable must not be stretched tightly.

General safety instructions

This device conforms to the relevant safety regulations. For safe handling of this
unit, please observe the following safety instructions:
- However, incorrect handling may lead to injury and damage.
- Before using this device for the first time, check it for visible outer damages
on the housing, connection cable and plug. Do not operate a damaged unit.
18