Davey CrystalClear 39050 Manuel D'installation Et D'utilisation page 6

Routine Maintenance tasks – to maximise the life of your pool
equipment & personal safety, use this checklist once a week.
Turn pump off first.
a. Make sure that any pressure gauges are in working condition and the
operating pressure is within limits as specified on the product.
b. Make sure that each suction inlet, and main drain has a cover that is
securely attached and in safe working condition.
c. Make sure that all skimmer covers are securely attached and in safe
working condition. These should be replaced every 3 to 4 years.
d. Remove any obstructions or debris from the main drain cover.
e. Ensure the skimmer baskets and the pump hair and lint pots are free of
leaves and debris at least once a week.
f. Remove obstructions and combustibles from around the pump motor.
g. Make sure all wiring connections are clean and that all wiring and
electrical equipment is in good condition. Damaged wiring must be
repaired or replaced by a qualified electrician as soon as damage is
discovered.
h. Check water balance and sanitiser levels at your local pool shop.
WARNING! Pump suction is hazardous and can trap and drown or
disembowel bathers. Do not block suction. Do not use or operate
swimming pools, spas or spa baths if a suction cover is broken,
missing or loose. Two suction covers and inlets must be provided into
every pump to avoid suction entrapment.
Specifications
CLEARANCE NEEDED TO REMOVE CARTRIDGE
6