Troubleshooting And Corrective Measures - Trotec BD10 Notice D'emploi

7. Troubleshooting and Corrective Measures

Code
204
208
209
252
253
255
B - 9
Cause
Corrective measures
Reception signal is too weak/
measuring time is too long/
distance is > 35m (98 ft)
The reception signal is too strong
The temperature is too high
The temperature is too low
Hardware error
Operating Manual – Laser Distance Meter BD 10
Corrective measures
Repeat process
Use a larger target plate (optional)
The target is reflecting too strongly (use a target plate)
Allow the meter to cool down
The device has to warm up first
Switch the meter on and off a few times.
Contact your dealer if the symbol continues to appear.
He will be able to help you.
EN