Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
enter into sound active and sensitivity control menu "S×.××". Press "up" and" down" over 2
seconds to change sound active mode "S1.XX" or "S2.XX". Press "up" and "down" to set up
sound sensitivity from S1.00～S1.31 or S2.00～S2.31.
3.4 Slave mode
Press "MODE" until it shows "SLAV" to enter into slave mode. The master fixture and the
slave fixtures are with the same synchronization-change when the master fixture is not on
the situation of slave mode.
3.5 Static colour mode
Press "MODE" until it shows "CL.××" to enter into static color mode. Press "up and "down" to
set up static color from CL.r-，CL.g-，CL.b-，CL.y-，CL.w-.
3.6 DMX mode
Press "mode" until it shows "d.×××" to enter into DMX mode. Press "UP" and "DOWN"
button to set up the DMX address from d.001～d.512. Press "setup" button to enter into the
DMX channel menu "d-Pxx". Press "up" and "down" to set up DMX channels "d-P1、
d-P2".Press "setup" button to enter into DMX mode2（d-P2）to run the built-in program
No.(Customers can select one program from Pr.xx as single control for the controller table).
Press "up" and "down" to set up built-in program n.01～n.28.
CHANNELS: 2ch and 3ch
DMX mode1：d.-P1
CH1
DMX
NO.
value
FUNCTION
0
0
OFF
1
1—9
Pr.01
2
Pr.04
10—19
3
20—29
Pr.05
4
30—39
Pr.06
5
40—49
Pr.07
CH2
CH3
SPEED
FLASH
NO USE
NO
USE
SPEED
FLASH
0--255
0--255
8-
Publicité
Table des Matières
