Auto Mode; Sound Active Mode - Nicols ZAP 7 Manuel D'utilisation

LED display for easier operation.
Selectable built-in programs, auto running, DMX mode, M/S, sound-active, mode static color
DMX modes: 2channels, 3channels
3. Operation of the unit
After power on, Press "MODE" button to activate the main menu: Built-in programs mode,
Auto running mode, DMX mode, Slave mode, sound-activated mode, static color mode.
"SETUP" is to set the relative specification for current mode.
"UP" is to add the value of current specification.
"DOWN" is to decrease the value of current specification.
Built-in programs-- running one of 33 built-in programs
Auto run: running built-in programs one after another in continuous loop.
DMX mode: controlled by DMX controller
Slave mode: the projectors in this mode will be synchronously run with the projectors in
master mode
Sound active mode: running by sound - activated
Static color mode: stay with static color
3.1 Built-in programs modes
Press "mode" until it shows "Pr.xx" to enter into built-in programs mode. Press "up" and
"down" to select program from Pr.01～Pr.33. Press "setup" button to enter into the running
speed menu "SP××". Press "up" and "down" button to set the speed value from SP01～
SP100. Press "setup" button to enter into the flash menu "FS××". Press "up" and "down" to
set up flash value from FS00～99.

3.2 Auto mode

Press "mode" until it shows "AUTO" to enter into auto running mode
Press "setup" button to enter into the running times menu "n.×××". Press "up" and "down" to
set the running times from n.001～n.100. Press "setup" button to enter into the running
speed menu "SP××". Press "up" and "down" button to set the speed value from SP01～
SP100. Press "setup" button to enter into the flash menu "FS××". Press "up" and "down" to
set up flash value from FS00～99.

3.3 Sound active mode

Press "mode" until it shows "SOUN" to enter into sound active mode. Press "setup" button to
7-