Cardin Elettronica 500 Mode D'emploi page 26

type
Menu 9 - Ambient light sensor - type # 09
0
ambient light sensor - OFF
1
ambient light sensor - ON
Menu 10 - Light sensor calibration - type # 10
Using this function it is possible to calibrate the intervention threshold for the ambient light sensor. To start the
procedure you must reinsert the access password and confirm by pressing .The keypad will carry out a 5
second countdown indicated by the sounding of the buzzer during which time the operator will have to remove
his hand from the vicinity of the keypad.
type
Menu 11 - Proximity sensor - type # 11
0
proximity sensor - OFF
1
proximity sensor - ON
Using this function it is possible to set the function mode of the proximity sensor. Passing you hand close to
the keypad will activate backlighting according to the values set in parameters #03, #09 e #14.
type
Menu 12 - Proximity sensor sensitivity - type # 12
0
sensitivity HIGH - faster with a greater detection range
1
sensitivity LOW - precise with reduced detection range
26
default
default
default