Personal Safety - Mellerware CJ100 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Dear customer,
Thank you for choosing to purchase a Mellerware
brand product. Thanks to its technology, design and
operation and the fact that it exceeds the strictest
quality standards, a fully satisfactory use and long
product life can be assured.
1. Parts description
1. Water Spout
2. Lid
3. ON/OFF Switch
4. Body
5. Handle
6. Water Guage
7. Corded Base
2. Safety advice and warnings!
Read these instructions carefully before switching
on the appliance and keep them for future reference.
Failure to follow and observe these instructions could
lead to an accident. Clean all the parts of the product
that will be in contact with food, as indicated in the
cleaning section, before use.
2.1. Use or working environment:
2.1.1. Keep the working area clean and well lit. Clut-
tered and dark areas invite accidents.
2.1.2. Use the appliance in a well ventilated area.
2.1.3. Do not place the appliance on hot surfaces,
such as cooking plates, gas burners, ovens or similar
items.
2.1.4. Keep children and bystanders away when us-
ing this appliance.
CJ100_IM_bk.indd 2
2.1.5. Place the appliance on a horizontal, flat, stable
surface suitable for withstanding high temperatures
and away from other heat sources and contact with
water.
2.1.6. Keep the appliance away from flammable
material such as textiles, curtains, cardboard or
paper, etc.
2.1.7. Do not place flammable material near the ap-
1
2
pliance.
2.1.8. Do not use the appliance in association with a
3
programmer, timer or other device that automatically
switches it on.
4
2.1.9. Do not use the appliance if the cable or plug is
5
damaged.
2.1.10. Ensure that the voltage indicated on the rating
label matches the mains power supply voltage before
6
plugging in the
appliance.
2.1.11. Connect the appliance to the mains power
7
supply with an earth socket withstanding a minimum
of 10 amperes.
2.1.12. The appliance's plug must fit into the mains
power supply socket properly. Do not alter the plug.
2.1.13. If using a multi plug check ratings carefully as
the current used by several appliances could easily
exceed the rating of the multi plug.
2.1.14. If any of the appliance casings breaks, im-
mediately disconnect the appliance from the mains
power supply to prevent the possibility of an electric
shock.
2.1.15. Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
2.1.16. Do not force the power cord. Never use the
power cord to lift up, carry or unplug the appliance.
2.1.17. Do not wrap the power cord around the ap-
pliance.
2.1.18. Do not clip or crease the power cord.
2.1.19. Do not allow the power cord to hang or to
come into contact with the hot surfaces of the appli-
ance.
2.1.20. Check the state of the power cord. Damaged
or tangled cables increase the risk of electric shock.
2.1.21. The appliance is not suitable for outdoor use.
2.1.22. Power cord should be regularly examined
for signs of damage, and if the cord is damaged, the
appliance must not be used.
2.1.23. Do not touch the plug with wet hands.

2.2. Personal safety:

2.2.1. CAUTION: Do not leave the appliance unat-
tended during use as there is a risk of an accident.
03-Jul-17 11:19:52 AM

Publicité

Table des Matières
loading

Table des Matières