What The Tria Laser Precision Is Used For (Indications); Who Should Not Use The Tria Laser Precision (Contraindications) - Beurer Tria Laser Precision LAS 50 Instructions D'utilisation

WHAT THE TRIA LASER
PRECISION IS USED FOR
(INDICATIONS)
The Tria Hair Removal Laser Precision is
used to remove unwanted hair. It is an over-
the-counter system intended for adjunctive
use with shaving for hair removal sustained
with periodic treatments. It is also intended
for permanent reduction in hair regrowth
defined as long-term, stable reduction
in the number of hairs regrowing when
measured out to 6, 9 and 12 months after
the completion of the treatment regimen.
It is intended for use only on light to medium
skin tones (see the Skin Tone Chart on the
inside front cover) and naturally brown or
black hair. It will not work on white, grey,
blonde, or red hair.
WHO SHOULD NOT USE
THE TRIA LASER PRECISION
(CONTRAINDICATIONS)
DO NOT USE the Tria Laser Precision if
your skin tone matches one listed as "Not
Safe" on the Skin Tone Chart on the inside
5
front cover of this booklet. If you use the
Tria Laser Precision on skin "Not Safe"
for treatment, the skin may absorb too
much laser light and be injured (burned,
discoloured, or scarred).
PLEASE NOTE: The skin sensor is a safety
feature that unlocks the Tria Laser Precision.
If it is not safe for you to use the Tria Laser
Precision, you won't be able to unlock it with
the skin sensor.
DO NOT USE the Tria Laser Precision if you
are under the age of 18 or use it on anyone
else under the age of 18. The use of the Tria
Laser Precision on or by children has not been
studied and could result in serious injury.
DO NOT USE the Tria Laser Precision if you
have a lighter hair colour, such as blonde,
white, red or grey. In order for the laser to
work, you must have naturally dark hair
where you are treating. Lighter hair pigments
will not absorb enough of the laser's energy
to disable the hair follicle.