IO Mabe IWO19JSPFSS Instructions Et Avertissements Pour L'installateur page 17

2 REMOVE CENTER HINGE
2.1 Using a 1/4" (6.4mm)
Allen screwdriver remove
the hinge pin from the
hinge bracket, the hinge
pin will be used again on
the opposite side.
2.2 Tape the door shut with
adhesive tape.
2.3 Using a 1/4" (6.4mm)
Allen screwdriver remove
the hinge pin from the
hinge bracket, the hinge
pin will be used again on
the opposite side.
2.4 Remove the tape and tilt the door away from the
cabinet. Lift the door off the bottom hinge pin.
2.5 Using a thin-blade screwdriver remove the button
plug from the left side of the door and install it on
the opposite side.
2.6 Set the door on a non-scratching surface with the
inside up.
3
TRANSFER CENTER HINGE
BRACKET
3.1 Using a 5/16"
(7.9mm) socket
ratche / driver,
remove the bolts
securing the
center hinge to
the cabinet.
3.2 Locate the plugs button in the kit and install them
in the opposite side of center hinge.
3.3 Flip the center hinge like
the picture and remount
them on the opposite
side, reinstall the screws
to 60lbs-in (6.78Nm).
4 INSTALL CENTER HINGE PIN
4.1 Using Allen screwdriver,
install the hinge pin into
the bracket hinge.
5
TRANSFER THE TOP HINGE TO
OPPOSITE SIDE
5.1 Remove the hinge base and flip the hinge like
the picture and remount hinge base.
Top hinge
(Left Side)
Top hinge
(Right Side)
17