Cleaning The Driving Wheel - Samsung SR8830 Mode D'emploi

Maintain tools and filter
CLEANING THE ROBOTIC VACUUM CLEANER

CLEANING THE DRIVING WHEEL

You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic.
If the robotic vacuum cleaner suddenly starts to zigzag, there
■
may be foreign substances stuck on the driving wheel.
1. When cleaning the driving wheel, place a soft cloth
on the floor and flip the main unit, placing it down
carefully.
2. Check for foreign substances and remove them
using a stick or a pair of nippers that are not sharp
at the ends if necessary.
40_ Maintain tools and filter