Installation Instructions; Cleaning Notes; Disposal Notes; Scope Of Delivery - Blaupunkt 600 Serie Mode D'emploi

Installation instructions

You may only install the car sound system yourself if
you are experienced in installing car sound systems
and are very familiar with the electrical system of
the vehicle. For this purpose, observe the
connection diagram at the end of these instructions.
Installing the device must not obstruct or block the
function of any airbags, other safety devices or
controls.
Declaration of conformity
The Blaupunkt Competence Center Car Multimedia
- Evo Sales GmbH declares that the device complies
with the basic requirements and the other relevant
regulations of the directive 2014/53/EU.
The declaration of conformity can be found on the
Internet under www.blaupunkt.com.

Cleaning notes

Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care product may
contain ingredients that will damage the surface of
the car sound system.
Use only a dry or slightly moistened cloth for
cleaning the car sound system.

Disposal notes

Do not dispose of your old unit in the
household trash!
Use the return and collection systems available to
dis-pose of the old device, the remote control and
exhausted batteries.

Scope of delivery

The scope of delivery includes:
• Car sound system
• Remote control
• External Bluetooth microphone
• Operating manual
• Support frame
• Small parts set
• Installation material
• Connecting cable(s)
Cleaning notes | Disposal notes | Scope of delivery | Operation

Operation

Touchscreen

Important note:
Do not use any pointed or hard objects, such as
ball point pens or fountain pens, to operate the
touch-screen.
The device features a capacitive touchscreen
that pro-vides a remote control (see the
section "Controls" at the beginning of these
instructions) and allows operating the device.
Tapping
To activate a control, e.g. a button, a slight
touching of the display surface is surface is
sufficient. You do not have to exert any
pressure on the display surface
• Short tap:
A short tap on the display surface is
sufficient for activating most of the controls.
• Long tap:
Some functions require a long tap. Rest your
fingertip on the display surface for
approximately 1 second.
Swiping/scrolling
Some functions require swiping across the
display surface, e.g.
• scrolling in lists
• adjusting sliders
Tap on the display surface and rest your finger
on the surface. Next, move your finger over the
surface.
29