Priority Scan Modes; Manually Selecting A Channel; Locking Out Channels - Albrecht AE125H Mode D'emploi

•
To permanently lock out a channel, press L/O twice quickly. See
Locking Out Channels on page 95

Priority Scan Modes

This scanner allows four different Priority modes. These modes also
function in Search and Hold modes (except Close Call Only mode).
(Default = Off)
In Scan or Search mode, press Func then Pri/1 to view the Priority
menu.
Scroll to highlight one of the following option and then press Pgm/E to
select it:
•
Priority Off- does not check for priority channels.
•
Priority DND- checks Priority channels every 2 seconds only
when not receiving. If you set Priority mode to Priority DND, the
scanner turns on the
•
Priority Scan- checks Priority channels every 2 seconds. If you
set mode to Priority Scan, the scanner turns on the PRI icon
during scanning or searching.
•
Priority Plus- scans only Priority channels in enabled banks. If
you set Priority mode to Priority Plus, the scanner turns on the
PRI+ icon during scanning.
•
Exit- Return to previous mode.
Note: If no Priority channels are enabled for scan, Priority Scan No
Channel displays and Priority mode is set to Off.

Manually selecting a Channel

You can continuously monitor a single channel without scanning. This is
useful if you hear an emergency broadcast on a channel or if you want to
monitor a specific channel.
1. To manually select a channel, press Hold and enter the
channel number.
2. Press Hold again.

Locking Out Channels

You can increase the scanning speed by locking out channels that have
a continuous transmission.
PRI
icon during scanning.
English 95