Appendix B: Attaching The Stabilizer Bracket; Warranty - Unity I UT3K Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Appendix B: Attaching the Stabilizer Bracket

A stabilizer bracket is included with all UT3K, UT4K, and UT5K units. Installation of the stabilizer bracket is
required to meet TÜV requirements, per standards EN 60 950 and EN 50091-1.
To attach the stabilizer bracket, follow the instructions below.
1.
The UPS is easier to move without the stabilizer bracket attached, so first move the UPS to its permanent
location.
2.
Place the stabilizer bracket flat against the back panel of the UPS. The base of the stabilizer bracket will rest on
the floor.
3.
Use the bolts to secure the brackets to the UPS (see Figure 14).
Figure 14

Warranty

LIMITED TWO YEAR WARRANTY
Standard Warranty For All Purchases
BEST POWER (an Invensys company) warrants that each product sold by BEST POWER is compatible with
existing commercially available computer equipment with enclosed power supplies and is free from defects in
materials and workmanship under normal use and service. This warranty is applicable only to the initial retail
purchaser (PURCHASER), and is not transferable. The duration of this warranty is two (2) years from the date of the
first retail sale or the date of delivery to the PURCHASER, whichever occurs first, subject to the following
conditions.
If the PURCHASER discovers within the duration of this warranty a failure of the product to perform compatibly
with presently existing computer equipment or a defect in material or workmanship, the PURCHASER must
promptly notify BEST POWER in writing within the duration of the warranty or not later than one month after
expiration of the warranty. BEST POWER's obligation under this warranty is limited to the replacement or repair,
subject to the conditions specified below, of such product returned intact to BEST POWER which shall appear to
BEST POWER, upon inspection, to have been either incompatible or defective. Replacement or repair will be made
at BEST POWER's Worldwide Service, Highway 80, Necedah, Wisconsin 54646, U.S.A. Such repair or replacement
shall be at BEST POWER's expense. This warranty does not cover any taxes which may be due in connection with
replacement or repair, nor any installation, removal, transportation or postage costs. These expenses will be paid by
PURCHASER. If BEST POWER is unable to repair or replace the product to conform to this warranty after a
reasonable number of attempts, BEST POWER will refund the purchase price. Remedies under this warranty are
expressly limited to those specified above.
TO THE EXTENT ALLOWED BY LAW, BEST POWER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY. TO THE EXTENT ALLOWED BY LAW, BEST
POWER SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, INJURIES TO PROPERTY, LOSS OF USE OF THE
PRODUCT OR ANY ASSOCIATED EQUIPMENT.
25
E
N
G
L
I
S
H

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

I ut4kI ut5kI ut8k

Table des Matières