LABBOX V05 Serie Mode D'emploi page 5

If these operations above are normal, the instrument is ready to operate following the "operation"
chapter. If these operations are not normal, the instrument may be damaged.
Please contact manufacturer/supplier for technical support.
5. Operation
B
D
F
5.1 Continuous operating
Place speed control knob at the lowest position. Put the instrument on a stable and safe place
•
and plug in the main power.
Push the two-direction switch left to ON and power LED is lit.
•
Turn the speed control knob to set speed.
•
Push the two-direction switch right gently to turn OFF.
•
5.2 Touch operating
A
Figure 2
Figure 3
Figure 4
A Mixing Head
C
Continuous mode
B indicator (Low speed
area)
E
Touch mode indicator
C
(High speed area)
D Power LED
E Speed control knob
F Two direction switch
5