Menu Navigation; Navigation Mode; Edit Mode - Western WRD Manuel De L'utilisateur

Menu Navigation:

Navigating through the various screens is very simple and intuitive. The WRD has two display environments (Pic.2):
- the main environment MAIN, consisting of six screens where the operation of the system is monitored;
- SETUP setting environment, consisting of 6 screens + 5 in ADV. SETUP where the settings for the operation are
set.
In the MAIN environment, the Up / Down buttons are used to scroll through the screens from 1.0 to 6.0, the Enter button
accesses any submenu. Pressing the Up/Down buttons simultaneously for 1 sec. you access the SETUP environment.
Here, it is always repeated with the same Up / Down buttons, the scrolling of the screens from 7.0 to 7.5. To return to the
MAIN environment use the Esc button pressed for 1 sec.
1.0
MAIN A
7.0
SYSTEM
8.0
WBUS CONFIG
Keys mode
---
DOWN

NAVIGATION MODE

ESC
GO INTO SETUP
ESC EDIT
DEC
> EDIT MODE <
2.0 3.0
VARIABLES
MAIN B
7.1 7.2
DATA/TIME DATA LOGGER
ADV. SETUP
8.1 8.2
WBM WRMxx
Pic.2 - Navigation menu
---
UP
EDIT
INC SELECT
OK
SAVE
Pic.3 - Edit menu
WRD
User manual
MAIN
4.0
PV STRINGS
SETUP
7.3
NETWORK
8.3
W-INVERTER
It is possible to enter the edit mode (Pic.3), where it
is allowed, to modify the parameters by keeping
pressed the Edit button for 1 sec. Entry into the
editing mode is visible on the display by the
presence of the cursors on the modifiable
parameter. For editing are used the Inc/Dec
buttons, to switch to another parameter, use the
Select button while to exit the Edit mode, without
saving the changes, use the Esc button. Where the
parameters to be modified are organized in lists,
the buttons Up/Down scroll the list or change the
value based on the selection. To confirm some
actions on the lists it must be pressed for 1 sec. the
OK button. For save the changes the button Save
must be kept pressed for 1 sec.
4
5.0 6.0
ENERGIES LOG.EVENTS
submenu
7.4 7.5
INFO OTHERS
8.4
WRD
Navigation Menu
EN