7Fs Setting The New Lowest Display And Height Range - Inova IDESK 61 GRIGIO Notice

6FS – SENSIBILITE DE L'EQUILIBRE
The desk has a balance sensitivity to make sure the 2 columns always work in the same position. You
can change this Sensitivity level by doing the following :
Press « M » button and hold 3 seconds, handset display « S— », Release « M » button, Press « M »
button again to enter, Display « 1Un »
1. Press UP or Down, it will display 6FS.
2. Press « M » to entrer, it will display current balance sensitivity level L5.
Total 9 levels for down from :
: is the most sensitivity setting
: is the least sensitivity setting
3. Press UP or Down to selct your favorite level, Press « M » button to confirm, wait 2 seconds, it
will display current height.
7FS – SETTING THE NEW LOWEST DISPLAY AND HEIGHT RANGE
The desk frame ships defaulted to its minimum and maximum height limits. These steps allow the
upper and lower limits to be adjusted to your preference :
Press « M » button and hold 3 seconds, handset display « S— », Release « M » button, Press « M »
button again to enter, Display « 1UN »
1. Press UP or DOWN, it will display 7FS.
2. Press « M » button to enter, it will display
: Set the lowest position height display.
: Set a new minimum desk height.
: Set a new maximum desk height.
3. Press UP or DOWN, it will display
height, Press UP or DOWN to set the lowest height display, press « M » to confirm.
4. Press UP or DOWN, it will display
lowest height, Press UP or DOWN to set a lowest height position, Press « M » to confirm.
5. Press UP or DOWN, it will display
highest height, Press UP or DOWN to set a new highest height position, Press « M » to confirm.
à
, press UP or DOWN, it display
, press « M » button to enter , it will display current lowest
, , press « M » button to enter, it will display current
, press « M » button to enter, it will display current
-13-
and