4Fu Go Up Anti-Collision Sensitivity Setting; 5Fd Go Down Anti-Collision Sensitivity Setting - Inova IDESK 61 GRIGIO Notice

4Fu – GO UP ANTI-COLLISION SENSITIVITY
The desk has an Anti-Collission Sensitivity that will stop the desk's movement if
it hits something on the way up. You can change this Sensitivity level by doing
the following :
Press « M » button and hold 3 seconds, handset display « S - - », Release« M »,
button, Press « M » button again to entrer, Display « 1UN »
1. Press UP or DOWN, it will display 4Fu
2. Press « M » button to enter, it will display current anti-collision sensitivity
level. Total 9 levels for up from
: is the most sensitivity setting
: is the least sensitivity setting
3. Press UP or Down to select your favorite level, Press « M » button to
confirm, wait 2 seconds, it will display current height.
5Fd –GO DOWN ANTI-COLLISION SENSITIVITY
The desk has an Anti-Collision Sensitivity that will stop the desk's movment if it
hits something on the way down. You can change this Sensitivity level by doing
the following :
Press « M » button and hold 3 seconds, handset display « S - - », Release « M »
button, Press « M » button again to enter, Display « 1Un »
1. Press UP or Down, it will display 5fd.
2. Press « M » button to enter, it will display current anti-collision sensitivity
level L5. Total 9 levels for down from :
: is the most sensitivity setting
: is the least sensitivity setting
3. Press UP or Down to select your favorite level, Press « M » button to
confirm, wait 2 seconds, it will display current height.
à
-12-