1Un Display Units Setting - Inova IDESK 61 GRIGIO Notice

1UN – DISPLAY UNITS
Change the numeric display to show heights in either inches or centimeters
Press « M » button and hold 3 seconds, handset display « S- - », Release « M » button, Press
« M » button to enter, Display « 1UN », Press « M » button again to confirm the first
programming setting.
1. It will display
setting is done, it will display current height ( cm)
2. After it display
wait 2 seconds, inches setting is done, it will display current height (inch)
2br – HANDSET DISPLAY BRIGHTNESS
Press « M » button and hold 3 seconds, handset display« S - - », release« M » button, press« M»
button to enter, display « 1UN »
1. Press UP/DOWN, it will display 2br.
2. Press« M » to enter, it will display current brightness level
: Means normal brightness
: Means low brightness
: Means high brightness
3. Pres UP or DOWN to select the desired brightness level, press « M » button to confirm, wait 2
seconds, it will display current height.
3bE SOUND SETTING
–
Press« M » button and hold 3 seconds,
Handset display « S - - », release« M » button, press « M » button again to enter, Display « 1UN »
1. Press UP or DOWN, it will display « 3bE »
2. Press« M » button, it will display current sound status:
: Means no sound when you press the button.
: Means with sound when you press the button.
3. Pres UP or DOWN to select
display current height.
, press « M » button to get CM display, wait 2 seconds, centimeters
, press « UP » or « DOWN », it will display
, then press « M » to confirm, wait 2 seconds, it will
-11-
, Press button « M »,