Ibiza DJM250BT-MKII Manuel D'utilisation page 4

17. Master Level Display
The LED display shows the level of the left and right master output
18. BOOTH Control
This knob controls the overall output level leaving the booth unbalanced RCA outputs.
19. MP3 PLAYER & BLUETOOTH
To refer USB / SD / BLUETOOTH PLAYER OPERATION below
REAR PANEL DESCRIPTION
20. Power Switch
Press down the button to turn on this unit. The LED will illuminate when the power is on.
21. AC Connection
Connect the unit to an appropriate 220-240Vac outlet.
22. XLR BALANCE OUTPUT JACKS
Connect the mixer to a receiver via cables with XLR plugs
23. BOOTH OUTPUT JACKS
Connect the mixer to a second amplifier powering speakers in the DJ booth or in a remote location
24. Master Output
Master output connects to the main amplifier (DJ final mix after crossfader section), accepts RCA jacks。
25. RECORD OUTPUT JACKS
Connect the mixer to a recorder to record your mix. The output signal is the same as on the MASTER jacks.
26. Phono/Line Inputs Sockets
These inputs, for ch1-ch2 and accept RCA-plug connectors. Use phono input socket for phonograph
turntables. Use line socket for CD/MP3 players. Line level musical instruments with stereo outputs such as
rhythm machines or samplers should also be connected with the line input socket.
27. Inputs Switch
Set these switches based on what is plugged into Phono/ Line input jacks
USB / SD / BLUETOOTH PLAYER OPERATION
1. SD CARD SLOT
Insert your SD card into this slot.
Note: Before you eject the SD card, please set the
playback in pause mode or select another playback
support (USB or Bluetooth)
2. LCD DISPLAY
The LCD display shows information as playback
support, file name, elapsed time, total time, file number, total file number, file system ( MP3 or WMA ) and
playback mode ( Repeat one, repeat all, or random. )
Note: In Bluetooth mode, LCD display shows only connection status (connected or disconnected). All playback
information is on the Bluetooth device.
3. USB SOCKET
Connect your USB key to this slot.
Note: Before you eject the USB key, please set the unit in pause mode or select another playback support (SD
card or Bluetooth).
4. STOP: Use this button to stop playback.
5. PLAY / PAUSE BUTTON
This button is used to start the playback or to enter in pause mode.
©Copyright LOTRONIC 2015 DJM250BT-MKII 4