Ibiza DJM250BT-MKII Manuel D'utilisation page 3

cleaning detergents
A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid
overheating
WARNING! To reduce the risk of electric shock, do not expose this equipment to rain or moisture!
The exclamation point triangle is used to alert the user to important operating or maintenance instructions
The lightning bolt triangle is used to alert the user to the risk of electric shock
Controls
1. Mic 1 Socket
Connect your microphone with 1/4" jack plug here.
2. MIC Level Control
With this knob, you can adjust the microphone volume。
3. MIC Treble
Used to increase or lower the microphone's higher frequencies.
4. MIC Bass
Used to increase or lower the microphone's lower frequencies.
5. Talkover Button
Press this button if you want to use your microphone. When the button is pressed, all other signal sources
will be attenuated by 14dB, so that the microphone can be clearly heard. In the OFF position, all signals
returns to their original level.
6. Phono/Line Switch
Use this switch to select the input to be sent to the individual channel.
7. Treble Control
Used to increase or lower the HIGHS of the input channel.
8. Middle Control
Used to increase or lower the MIDS of the input channel.
9. Bass Control
Used to increase or lower the LOWS of the input channel
10. Channel Fader
Used to adjust the level of each channel.
11. Crossfader
Mixes the signals of one channel with another. If the crossfader is in the center position. Both channels can
be heard.
12. Headphone Socket
Connect your headphone with impedance between 8 and 600 Ohms to this connector.
13. Cue Button
Use this button in order to select the channel(s) to be monitored by headphones.
14. HEADPHONE LEVEL CONTROL
Let you to control the volume level of headphone
15. HEADPHONE CUE/PGM CONTROL
Allows you to listen simultaneously or separately to the CUE material or the active program.
16. Master Control
Adjust the level of the master-output.
©Copyright LOTRONIC 2015 DJM250BT-MKII 3