Connection Of Drain Hoses - Farberware FDW05ASWWHC Manuel D'utilisation

electric current. This appliance is equipped with a cord having an equipment-earthing
conductor and an earthing plug. The plug must be plugged into an appropriate outlet
that is installed and earthed in accordance with all local standards and requirements.
WARNING:
Improper connection of the equipment earthing conductor can result in the risk of an
electric shock. Check with a qualified electrician or service representative if you are in doubt whether
the appliance is properly earthed. Do not modify the plug provided with the appliance. If the plug
does not fit properly to the outlet, please have a qualified electrician to install a proper outlet.

CONNECTION OF DRAIN HOSES

The connection of the drain pipe: Put end of the drain into a sink or bucket.
How to Drain Excess Water From Hoses: If the sink is more than1000 mm
higher than the floor, the excess water in hoses cannot be drained directly
into the sink. It will be necessary to drain excess water from hoses into a bowl
or suitable container that is held outside and lower than the sink.
Water Outlet: Connect the water drain hose. The drain hose must be correctly fitted
to avoid water leaks. Ensure that the water drain hose is not kinked or squashed.
Extension Hose: If you need a drain hose extension, make sure to use
a similar drain hose. It must be no longer than 4 metres, otherwise
the cleaning effect of the dishwasher could be reduced.
16