Rega Apollo Mode D'emploi page 16

English
creating a program
1) Press PROGRAM on the remote handset to create your new programme list: PROGRAM
will appear on the display.
2) When the first program location appears, you can enter the required track number.
Continue this until your programme is complete up to a maximum of 99 locations.
3) Use the TRACK NEXT and TRACK PREVIOUS buttons to enter the track numbers.
Press the OK button twice after each track is selected.
4) If you enter the wrong track number it can be deleted by pressing the CLEAR button.
This will clear the last location entered.
5) Press PROGRAM again to finish programming.
6) Pressing PLAY will activate your programme. The display now shows the first track that
was entered into your programme.
7) If PROGRAM is pressed again, you can enter further tracks from the last location in your
programme. This can be done either when the Apollo is playing your programme or when
stopped.
8) To clear your programme, make sure the Apollo has stopped, then press the CLEAR
button.
NB: The program function does not work for MP3, WMA or MIX files.
16