Connecting An External Sound System - HP PL5072N Guide De L'utilisateur

3
Connect the VGA and audio cables to the PC or
source equipment.
4
Connect power to the TV; see "Connecting power
to the TV" on page 18.
5
Turn on the TV; see "Turning the TV On and Off"
on page 19.
6
Connect power to, and turn on, the PC or source
equipment.
7
Select the input source to view, as well as the
Picture mode, Aspect, and other options; see
"Operating the TV" on page 21.
8
Adjust the picture, including Auto Sync, by using
the onscreen display (OSD) Picture menu PC
Screen option; see "Adjusting the PC Screen
image" on page 31.
You can also start Auto Sync for the PC image by
pressing the Select button on the TV.
Connecting an external sound
system
You can connect an external sound system to the TV by
using the Audio Output connectors for a digital audio
or analog audio signal:
Use an optical audio cable and the Audio Output
■
Digital (Optical) connector on the rear of the TV to
provide a digital audio signal to an external
sound system, such as a digital receiver or a
surround sound system.
Use an audio cable and the Audio Output Left and
■
Right connectors on the rear of the TV to provide
an analog audio signal to an external sound
system, such as an analog amplifier or stereo
system.
The input source signal and the Audio menu settings in
the onscreen display determine the type of audio
output. This TV does not support Dolby Digital audio
input over HDMI. When connecting a set-top box, DVD
player, or other device by means of the HDMI
connector, set the device audio output to PCM format.
See "Understanding audio output" on page 32 for
information on the audio output type.
c
CAUTION: Unplug power for the TV and all
connected components before connecting
an external sound system. Ensure that the
external sound system is powered off.
1
Connect the external sound system to the TV:
For a digital connection, connect an optical
■
audio cable to the Audio Output Digital
(Optical) connector on the rear of the TV and
to the external sound system, such as a digital
receiver or a surround sound system.
For an analog connection, connect an audio
■
cable to the Audio Out L and R connectors on
the rear of the TV and to the external sound
system, such as an analog amplifier or stereo
system.
Audio Output
Digital
R
(Optical)
L
2
Connect power to the TV; see "Connecting power
to the TV" on page 18.
3
Turn on the TV; see "Turning the TV On and Off"
on page 19.
4
Connect power to, and turn on, the external sound
system.
5
Define the digital audio format in the onscreen
display Audio menu; see "Choosing the digital
audio output mode" on page 32.
6
If desired, you can turn off the TV speakers by
using the onscreen display Audio menu Speakers
option; see "Using the Audio Menu" on page 31.
17
Setting Up the TV