Lifting The Tv; Attaching Or Removing The Stand - HP PL5072N Guide De L'utilisateur

Lifting the TV

The TV is heavy; be sure to use ergonomically correct
lifting procedures when moving the TV.
Due to the size and weight of the TV, it is
recommended that a minimum of two people move it.
To transport the TV, grasp the left and right ends of the
panel in the areas below and above the screen. Do not
lift the TV by the attached stand.
Move the TV gently. Never place the TV with the
glass screen facing downward, unless it is protected
with pads.

Attaching or removing the stand

Your HP HDTV comes with the stand attached. Select
TV models come with a stand that must be attached to
the display. Reverse these steps to remove the stand.
CAUTION: Use two people to assemble
the TV.
Before attaching the stand, unplug the AC power cord
from the AC power outlet, and remove any cabling.
1
Locate the stand and the
four screws from the
box. Position the stand
upright, with the rear
toward you. (Look for
the label REAR on the
stand.)
8
HP HDTV User's Guide
c
2
Gently lift the TV panel with the rear toward you
and the openings in the bottom edge facing
downward, and lower the panel onto the stand.
3
Insert the screws into the four holes on the rear of
the TV, and then tighten the screws.
4
Place the TV upright on a stable surface.