HP PL5072N Guide De L'utilisateur page 25

Connecting a high-definition DVD player
or other equipment by using component
cables
There are two sets of high-definition Component
connectors that you can use:
1: Component In Y, Pb, and Pr, and Audio In
■
L and R
2: Component In Y, Pb, and Pr, and Audio In
■
L and R
1
Connect component video cables and left-right
audio cables to the Component In connectors on
the rear of the TV.
2
Connect the cables to the DVD player.
3
Turn on the DVD player, and start play.
4
Connect power to the TV; see "Connecting power
to the TV" on page 18.
5
Turn on the TV; see "Turning the TV On and Off"
on page 19.
6
Select the input source to view, as well as the
Picture mode, Aspect, and other options; see
"Operating the TV" on page 21.
L R
Y Pb Pr
Connecting a standard-definition DVD
player or other equipment by using
S-Video or Video cables
Connect a standard-definition DVD player, VCR, game
console, camcorder, or other AV equipment by using
S-Video In or Video In (composite video) connectors.
These connectors do not pass high-definition signals.
!
The S-Video In and Video In connectors
share the audio connectors in the set. Do
not connect video cables to both the
S-Video In and Video In connectors in a set.
1
Connect an S-Video cable, or a composite video
cable, by using the AV connector sets on the rear
of the TV:
AV1: S-Video In or Video In, and Audio In
■
L and R
AV2: S-Video In or Video In, and Audio In
■
L and R
S-Video connection
15
Setting Up the TV