Selecting The Cassette Type - Samsung DVD-V5650 Manuel D'instructions

V C R O
Selecting the Cassette
If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the
type of cassette inserted.
1
Press the MENU button on the
remote control.
2
Press the "$# buttons to
select VCR, then press the
% or ENTER button.
3
Press the "$# buttons to
select Tape Length, then
press the % or ENTER
button to select the correct
cassette length.
4
Press the MENU button to exit.
P E R AT I O N S
ENG-70
Type
n
Note
This information is usually printed on the
tape box. The menu cycles through: T-120,
n
T-160 or T-180.
Once the type of cassette is set, the VCR
can display the amount of time remaining on
the tape when you press the INFO. button.