Connection To An Audio System - Samsung DVD-V5650 Manuel D'instructions

Connection to an
Connection to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the (LINE)
AUDIO (red and white) OUT
rear of the DVD-VCR to the
white) IN terminals of the
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO or COMPONENT
terminals on the rear of the DVD-VCR to the
VIDEO, S-VIDEO or COMPONENT
your TV as described on pages 15 to 18.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the
select the External input in order to hear sound
from the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 59 to 60)
- The position of terminals may vary depending on the Amplifier.
Please refer to your Amplifier's user manual .
- You can also connect the amplifier using AUDIO OUT (red and white) terminals from the DVD-VCR.
C
O N N E C T I O N S
Audio System
terminals on the
AUDIO (red and
Amplifier.
OUT
IN terminal of
Amplifier to
2-channel
Stereo Amp.
ENG-19
Red
Audio Cable
Red White
White