Connection To A Tv (Interlace) - Samsung DVD-V5650 Manuel D'instructions

Connection to a TV (Interlace)

- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(Y), blue(P
are delivered through the audio out or line out audio).
1
Using component video cables (not included),
connect the COMPONENT VIDEO OUT terminal
on the rear of the DVD-VCR to the
IN terminal of your TV.
2
Using the audio cables, connect from the AUDIO
OUT or LINE OUT AUDIO (red and white)
terminals on the rear of the DVD-VCR to the
AUDIO (red and white) IN terminals of your
Turn on the DVD-VCR and TV.
3
With the unit in stop mode, set the Alt video
output to Component: Interlace in the Display
Setup menu (see pages 61~62) or press the
PROGRESSIVE button on the remote control
until Interlace is output.
4
Press the input selector on your
control until the Component signal from the DVD-
VCR appears on the TV screen.
Notes
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)
- The component terminal of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "PR, PB, Y"
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you
must have the Video Out (Yellow) or RF Out jack connected.
- You can hear sound from
connection. VCR audio only outputs through Line Out Audio jacks (Red,White).
C
O N N E C T I O N S
), red(P
B
COMPONENT
TV remote
LINE OUT AUDIO
) signals to present clear and clean images. (Audio signals
R
TV.
White
Red White
or AUDIO OUT (red and
ENG-17
Blue
Red
Green
Red
Audio Cable
Component Cable
(not included)
Red Blue
Green
white) terminals for Component