Table Des Matières; Eu-Konformitätserklärung; General Notes; Intended Use - Kärcher HD 6/15 G Classic Manuel D'instructions

EU-Konformitätserklärung

Hiermit erklären wir, dass die nachfolgend bezeichnete
Maschine aufgrund ihrer Konzipierung und Bauart so-
wie in der von uns in Verkehr gebrachten Ausführung
den einschlägigen grundlegenden Sicherheits- und Ge-
sundheitsanforderungen der EU-Richtlinien entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Ma-
schine verliert diese Erklärung ihre Gültigkeit.
Produkt: Hochdruckreiniger
Typ: 1.187-xxx
Einschlägige EU-Richtlinien
2000/14/EG
2006/42/EG (+2009/127/EG)
2014/30/EU
2009/125/EG+ 2009/1781
Verwendete harmonisierte Standards
EN 60335-1
EN 60335-2-79
EN 55012: 2007 + A1: 2009
EN 55014-2:2015
EN 62233: 2008
Angewandte Konformitätsbewertungsmethode
2000/14/EG: Anhang V
Schallleistungspegel dB(A)
HD 6/15 G Classic
Gemessen: 106
Garantiert: 108
HD 7/20 G Classic
Gemessen: 104
Garantiert: 106
HD 8/23 G Classic
Gemessen: 106
Garantiert: 108
HD 9/25 G Classic
Gemessen: 108
Garantiert: 110
Die Unterzeichnenden handeln im Auftrag und mit Voll-
macht des Vorstands.
H. Jenner
Chairman of the Board of Management
Dokumentationsbevollmächtigter:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 01.03.2021
S. Reiser
Director Regulatory Affairs & Certification
Contents

General notes......................................................

Intended use .......................................................
Environmental protection ....................................
Accessories and spare parts...............................
Scope of delivery.................................................
Symbols on the device ........................................
Safety instructions...............................................
Safety devices.....................................................
Device description...............................................
Colour coding ......................................................
Initial start-up.......................................................
Operation ............................................................
Transportation .....................................................
Storage................................................................
Care and service .................................................
Troubleshooting guide.........................................
Warranty..............................................................
Technical data .....................................................
EU Declaration of Conformity..............................
General notes
Read these original operating instruc-
tions and the enclosed safety instruc-
tions before using the device for the first
time. Proceed accordingly.
Keep both books for future reference or for future own-
ers.

Intended use

Use this high-pressure cleaner only for the following
types of work:
The high-pressure jet is intended exclusively for
cleaning, e.g. machines, vehicles, structures, tools,
facades, terraces and garden equipment.
We recommend using a dirt blaster as a special acces-
sory for stubborn soiling.
The device is suitable for operation in altitudes of up to
500 m. For operation in higher altitudes the engine must
be adapted by the KÄRCHER Customer Service.
DANGER
Operating the device at gas stations or other dan-
gerous areas
Risk of injury!
Follow the respective safety regulations.
Note
Please do not let waste water contaminated with miner-
al oil reach soil, water or the sewage system. Only clean
the engine and the engine bottom in a suitable site with
an oil trap.
Water supply limit values
ATTENTION
Dirty water
Premature wear and tear or deposits in the device
Supply the device using only clean water, or recycled
water that does not exceed the specified limit values.
The following limit values apply to the water supply:
pH value: 6.5-9.5
Electrical conductivity: Conductivity of fresh water
+ 1200 μS/cm, maximum conductivity 2000 μS/cm
Settleable particles (sample volume 1 l, settling time
30 minutes): < 0.5 mg/l
11
11
12
12
12
12
12
12
13
13
13
14
14
14
15
15
16
16
17