Elipson IC4 Mode D'emploi page 18

UK
Tweeter adjustment
The steerable tweeter can be directed to the listening area for superior treble and stereo
image accuracy.
IV. INSTALLATION
Preparation of mounting surfaces / Finishing of ceilings and walls
Prior to start the installation of the speakers, it will be necessary to run cables to the speaker
locations. See your dealer for more information on cable installation. After the cable has
been properly installed, you are ready to mount the speakers.
1. Determine the best area to mount your speakers
This area of the ceiling or wall should be free of obstructions such as electrical conduit,
HVAC ducts, or water lines. If possible, you should access to an attic or crawl space in order
to best noting the location of such obstacles.
2. Find the eventual beams / joists near the desired speaker mounting location
We highly recommend you to use a good stud-finder tool for this procedure. If you are
placing the speakers really close to some studs or other object, make sure you consider the
size of the baffles flange, which extends beyond the mounting hole.
3. Make the hole
A punch out template for setting the hole is provided in the box. Position the template in
the desired position and pencil an outline on the wall or ceiling.
18